Description
Atoll IN300 with DAC ex-demo
The Atoll IN300 amplifier is hand made by experts in Normandy, Northern France – it offers superb value for money and audiophile performance at a very realistic price-point.
The IN300 integrated amp-preamp is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.
Atoll balanced MOS-FET amplifier circuits offer excellent harmonic gradients and have no memory effect, every moment, the current is immediately delivered to your speakers. This is one of the secrets of the musicality that ATOLL amplifiers enjoy.
- 8 mm brushed aluminium front.
- 2×150Wrms / 8Ω.
- 2 toroidal transformers of 440 VA each.
- Filtering capacitors: 12×6800 μF high quality, with low ESR specific for ATOLL.
- Specific low-consumption 5 VA power supply for the digital stages.
- 2 volume attenuators: 1 per channel to maintain the dual mono architecture.
- Soft start stage to avoid peak consumption.
- ABSOLUE CREATIONS high-end cable on the mains part.
- MOS-FET triple push-pull power stage.
- Shielded MKP Mundorf capacitors.
- Possibility to adjust and store the balance.
- Discrete component audio stages.
- MKP Technology Link Capacitors.
- High-performance heat sinks, direct thermal coupling.
- Double-sided circuit boards with nickel/gold finish.
- Polarization of output stages in class A/B.
- Thermal protection.
- Serial DAC board.
- Optional PHONO boards: P50 and P100, can be combined with the DAC board.
- ATOLL global remote control delivered as standard.
CONNECTIVITY
Line inputs
5 Line inputs (including 1 AUX for optional phono card).
1 BY-PASS input.
1 XLR input.
Digital inputs
2 Coaxial Inputs.
2 Optical Inputs.
1 USB-B input
DAC converter: AKM – AK4490 / PCM: 32 bits – 768 kHz
Built-in converter: Asynchronous USB input, PCM & DSD decoding.
DSD: 2.8MHz/5.6MHz
1 Bluetooth receiver (data conversion by AKM – AK4490).
Outputs
1 Pair of loudspeaker outputs.
2 Pre-out outputs.
1 Headphone output Ø 6,35 mm.
1 Trigger output (12V).
TECHNICAL DATA
Output power/ 8 Ω: 2×150 W
Output power/ 4 Ω: 2×260 W
Power supply: 2×440 VA
Total of capacitors: 86 400 µF
Number of inputs: 6 + 1 BY-PASS
Bandwidth: 5 Hz – 100 kHz
Rising time: 2,0 µs
Input impedance: 220 kΩ
Sensitivity: 540 mV
Signal/Noise ratio: 100 dB
Distortion at 1 kHz: 0,05% / (10 W)
Dimensions: 440×365×103 mm
Weight: 16 Kg
Reviews
There are no reviews yet.