ELAC Concentro



ELAC Concentro £53,000

ELAC Concentro are one of the finest loudspeakers ever made – absolutely breathaking performance and styling. Concentro is built to order and painted in a RAL colour of your specification and a choice of wood, leather or carbon fibre side panels.

ELAC

Description

ELAC Concentro are one of the finest loudspeakers ever made – absolutely breathaking performance and styling. Concentro is built to order and painted in a RAL colour of your specification and a choice of wood, leather or carbon fibre side panels.

One look tells you this is no ordinary loudspeaker; at more than 5½–ft tall and weighing more than 300 lbs, Concentro commands attention. Its elliptical cabinet is crafted to the finest furniture-grade perfection and finished in high-gloss white or black epoxy, or to specification in any colour in between. The Concentro cannot be mistaken for any other speaker, with a complex base machined from a single block of aluminium and weighing more than 55 pounds. Integral oval side panels of precious wood, carbon fiber or leather surround a pair of side-firing 250mm woofers on either side of the enclosure. These newly-developed units feature smooth, stiff aluminium-sandwich diaphragms, and fire in a push-push/pull-pull configuration that delivers maximum energy and accuracy, down to the lowest octave. The back of the cabinet features twin ports for the bass drivers.

The sophisticated front baffle features curves that allow optimum propagation and dispersion of sound waves from the two drivers. On top is a dual-concentric 127mm midrange with JET-5 tweeter at its acoustic center. Beneath this is a front-firing 177mm crystal membrane mid-woofer. The whole results in a near point-source presentation of the sound source, micro-accuracy and flawless, pinpoint imaging. Meanwhile, dynamic range is nearly unlimited, from the most nuanced detail to the most powerful crescendo.

Sophisticated aluminum woofers

Through the use of aluminum, resonances that affect the linearity of common paper cones can be placed beyond the driver’s operating frequency range. The motor structure features a large 3-inch diameter voice coil with oversized magnet and a vented pole piece to increase power handling, for accurate reproduction of bass frequencies that are clean, clear and powerful

Crystal membrane midrange and mid-bass drivers

The eye-catching surface of the crystal membrane is more than just an attractive design feature. The midrange/woofers of the Concentro employs the Crystal Membrane (patent pending) and the design is based on ELAC’s Aluminum-Sandwich AS Technology. The crystal-shaped inverse aluminum dome is joined to the paper cone in a special gluing process to result in the desired sandwich construction. Resembling the surface of a large crystal, the aluminum-foil stamping stiffens the aluminum dome, diminishing resonances and minimizing colouration, while improving power handling and dynamics.

JET 5 tweeter

Delivering true high-definition sound, ELAC’s JET 5 tweeter enthralls with its lightning-fast response and wide dynamic range, offering minimal distortion, lots of headroom and a distinctly wider frequency range than conventional dome tweeters. The ELAC JET tweeter is one of the most legendary tweeters in the industry and has won international praise with its transparent and effortless sound image.

The JET tweeter was developed to perfection on the basis of the famous Air Motion Transformer by loudspeaker pioneer Dr. Oskar Heil. Its operating principle is based on a concertinaed-foil membrane, driven by a strong neodymium magnet. This motor drives the air considerably faster than that of a conventional driver, with gains in higher sensitivity and extraordinary dynamics. Due to many additional design changes, like an improved new neodymium magnet system, even higher efficiency, higher sound pressure levels and frequency response up to 50 kHz was achieved.

The core of the JET tweeter is the folded foil membrane. With a fold width of only 0.84 mm, a major requirement in the JET production is precision. To guarantee repeated accuracy and unchanging quality even with high production capacity, gluing and handling are now executed by two SCARA robots. The folding and fixing of the membrane, however, are executed by hand, since for production steps requiring extreme precision, the manual dexterity of skilled technicians is irreplaceable. Due to continuous improvement, the JET 5 tweeter creates an effortless, airy and resonance-free image up to 50,000 Hz, and with its linear frequency response is ideally suited for the reproduction of hi-res formats

Specifications

Tweeter:  JET 5, modified

Midrange: 70/140 [mm]AS-XR Ring radiator

Midbass: 220 [mm] AS-XR Cone

Bass reflex tubes: 2 off 120×350 [mm] Cone

Woofer: 4 off 250 AS  [mm]

Bass Loading: Vented Box

Crossover Frequencies: 120 / 360 / 2700 [Hz]

Frequency range ( IEC 268-5): 18 – 50 000 [Hz]

Sensitivity: 90 [dB/2.83V/m]

Recommended amplifier power: 80 – 600 [W/Channel]

Suitable for amplifier rated between: 4-8 Ω

Rated power (Continuous): 400 [W]

Rated power (Dynamic): 600 [W]

Rated impedance: 4 Ω

Binding posts: 5-way custom; bi-wirable

Magnetic shielding: No

Weight: 140 [kg]

Dimensions (WxHxD): 460 x 1680 x 610 mm with spikes

Brand

ELAC Audio

ELAC