Description
Atoll PH200
The Atoll PH200 is an audiophile high-performance phono-preamplifier, hand made by experts in Normandy, Northern France – it offers superlative audiophile performance at a very realistic price.
The Atolll PH200 phono preamplifier is an external module with a special power supply consisting of two ultra-low noise high-end transformers (one per channel) and four voltage regulators. The entire unit is shielded with a metal box to prevent interference with the audio stage. Constructed entirely from discrete components and contains no intermediate capacitors. Settings (MM/MC, input impedance) can be accessed directly from the back of the case.
- 8 mm brushed aluminium front panel.
- Silver mica technology RIAA filter capacitors.
- 2 very low noise linear transformers 3,5 VA each.
- 4 regulated power supplies.
- Total of capacitors: 54 400 µF.
- Input impedance: 47 kΩ.
- Input capacity: Nothing / 100 pF / 220 pF / 320 pF(*).
- MM gain: 40 dB (*).
- High-level MC gain: 47 dB (*).
- Low-level MC gain: 60 dB (*).
- Signal/Noise ratio at 1 kHz: 80 dB.
- Crosstalk at 1 kHz: < -86 dB.
- Frequency response (20 Hz – 20 kHz): < 0,1 dB.
- THD: 0,05%.
(*) Depending on the switch position.
CONNECTIVITY
Ground
1 Module signal output.
1 Turntable signal input.
Settings block (Left channel).
Settings block (Right channel).
1 12V Trigger Input.
TECHNICAL DATA
Power supply: 2×7 VA
Total of capacitors: 54 400 µF
Cartridges type: MM / MC
Input impedance: 47 kΩ
Input capacity: Nothing / 100 pF / 220 pF / 320 pF(*)
MM gain: 40 dB(*)
High-level MC gain: 47 dB(*)
Low-level MC gain: 60 dB(*)
Signal/Noise ratio at 1 kHz: 80 dB
Crosstalk at 1 kHz: <-86 dB
THD: 0,05%
Dimensions: 440×295×63 mm
Weight: 5 kg
(*) Depending on the switch position.
(Data subject to change).
Michael Andrews (verified owner) –
First class service. Had a bit of a problem with the item – no fault of Audiological – but Richard sorted it immediately for me, very approachable and easy to talk to. Thankyou again.