Technics SB-C600 standmount speakers
Technics SB-C600 speakers sound amazing for the money, true audiophile build quality and sound for a fraction of the cost of small boutique brands.
Advanced Phase Precision Driver
To reproduce music with enhanced spatial sound expressivity requires that the wavefronts of sounds radiated from the speaker unit are all aligned regardless of the listening position. The concept of point sound source is one of the ideal approaches to achieve it.
To realise the point sound source reproduction, the coaxial configuration was adopted and then it was combined with the originally shaped Linear Phase Plug for aligning phases and the Smooth Flow Diaphragm formed with a shallow-shape diaphragm and smooth edge shape for minimum sound reflection. The result is a spherical wave with aligned wavefronts of radiated sounds.
The SB-C600’s 2-way coaxial speaker unit realises clear sound image localisation and a smooth, high-quality sound, rich of emotion, while inheriting the concepts of point sound source and linear phase that Technics pursues relentlessly.
Smooth Flow Diaphragm
If the sound wave has irregularities on its sound transmitting surface, its wavefront becomes disturbed by the shapes of the irregularities, resulting in the degradation of frequency characteristics. High frequencies that have short wavelengths tend to be more susceptible to the degradation of sound characteristics.
The woofer diaphragm in the coaxial speaker unit has a shallow shape and smooth edge to reduce sound reflection. The result is minimal disturbance of the wavefronts of sound waves radiated from the diaphragm to realise excellent frequency response and phase characteristics as well as wide directivity.
This configuration achieves a wide sound stage and smooth and rich mid- to high-frequency range.
A bass reflex port with an ordinary shape produces a large air current vortex that induces annoying high-frequency noise. Technics employed the airflow control method utilised for aeroplane wings and designed the cross-sectional shape of the port using flow analysis.
The optimally designed port shape does not cause airflow disturbance at the opening and ensures high-quality bass reproduction with minimum noise and superb response.
It thoroughly removes undesirable or unwanted sounds and reproduces only the intended sounds with a high signal-to-noise ratio. The “Balanced Driver Mount Architecture” used in the grand class SB-G90M2 has been optimised for this model by making full use of CAE (Computer Aided Engineering).
In addition, the speaker mount baffle that holds the speaker units in place has been newly designed to strengthen the rigidity of the entire cabinet. The combination of these factors maximises the advantages of the gravity centre mount structure.
The rigidity and shape of each part that makes up the coaxial speaker unit has been carefully studied to eliminate unnecessary vibration and noise.
|Woofer / Tweeter||15 cm (6″) Cone type x 1 / 2.5 cm (1″) Dome type x 1|
|Input Power (IEC)||60W (Rated), 120 W (Max)|
|Recommended Amp Power||40- 120 W (Speaker tested by IEC60268-5 Short Term Max Test)|
|Sound Pressure Level||83 dB / 2.83 V (m) 80 dB / W(m)|
|Frequency Range||40Hz – 100kHz (-10dB)|
|Dimensions (W x H x D)||173 mm × 293 mm × 283 mm (Include net 8mm and terminal 15mm)|
|Weight||Approx. 6.3 kg|
|Accessories||Speaker Cable x2*¹, Owner’s Manual x1 *1 Length of the speaker cable may not be sufficient on your placement. Please prepare suitable cable based on your installation requirements.|