892526702

VAT  

Registration

6632457

Company  

Registration

Sales and Service

Tel: 01403 336 339

Or: 07901 833128

audiologica@btinternet.com

www.audiologica.co.uk

Audiologica Ltd

30 Finians Field

Barns Green

Horsham

West Sussex

RH13 0PW

Seen it cheaper? We will match any like for like advertised price on new products provided it’s in stock at any genuine UK dealer

Have you checked our Special Offers page for this months bargains?  These items may be ex-demo or end-of-line so are sold on a first-come-first-served basis, so call us now to reserve yours

mail: audiologica@btinternet.com

Call: + 44 (0) 1403 336 339 or 07901 833128

Trichord Dino 3

Trichord Dino 3 @ Audiologica, the legendary Trichord Dino phono preamplifier is now its third incarnation and better than ever


The Dino Mk3 is a high performance phono amplifier which at an affordable price gives you tremendous value.


Designed for transparency and realism, this superb sounding amplifier is based on the fore-running Dino Mk1 and Dino Mk2 phono stages which have won many awards and accolades along the way.


Whether you have an ultra-low output Moving Coil cartridge or a high output Moving Magnet the Dino Mk2 will cope easily. A set of user friendly switches on the base of the unit allows you to simply adjust load and gain settings.


These settings are vital to match the amplifier to the cartridge and obtain the best sonic result. If your current phono stage only has a couple of options for this function, eg a MM/MC switch, then you are missing out on the ability to tune your system to it’s optimum.


An entire upgrade path exists for this product which allows you to improve performance each step of the way.


Two main items are required for operation – the Dino Mk3 phono stage itself and an accompanying power supply.


Start with the basic ac Toroidal Power Supply and work your way up in performance by upgrading to the ‘Dino+’ dc power supply, and ultimately to the ‘Never Connected’ dc power supply. An upgrade from the ‘Dino+’ to the ‘Never Connected’ is also possible by returning your unit to us to upgrade the electronics.


To further enhance the sonic performance of these dc power units an upgrade ‘High Performance Power Lead’ is available to replace the supplied dc power lead


With Dino Plus  PSU - £651.99

With Dino Plus and Cable Upgrade - £799.99

Trichord Dino 3

£498.99

Item:

Price:

Stereo phono amplifier for Moving coil and Moving

magnet cartridges. Fully passive equalisation between two active gain stages.


Switch selectable cartridge resistance loading (DIP 1 and 2)

33 ohms   For Moving Coil cartridges

100 ohms   For Moving Coil cartridges

1000 ohms   For Moving Coil cartridges

47,000 ohms   For Moving Magnet and some Moving Coil cartridges

 


RIAA reproduction characteristics


20Hz to 20,000Hz      +/-0.25dB


Output voltage: 0.5V at 1KHz

Power supply requirements


The Dino Mk2 can be powered from either an AC or a DC power supply.


AC requirements: two independent supplies of:         

0v / 18v ac,        0v / 18v ac.

DC requirements: two independent supplies of:         

v /-22vdc ,      0v  / +22vdc


To avoid problems only use Trichord power supplies.


Shown with Dino + PSU