Audiologica Ltd: Company Registration Number : 6632457    VAT Registration Number: 892 5261 02

Configuration: 7 channel inputs :

RCA and true balance XLR

Power output:

7 x 175W@8ohm

7 x 335W@4ohm

Frequency Response: 20 Hz -0.3 dB - 120 kHz -3 dB

THD+N = 0.01%, 1kHz, 1W to 10W, A Weighted.

Input impedance: 22K ohm.

Input sensitivity = 2.57V, 100W @ 8 Ohm; 1.81V, 100W @ 4 Ohm.

Gain: 21 db.

SNR > 100 db at 100W.

12V DC Trigger Input. Use 3.5mm stereo connector as the trigger input cable.

Chassis is made of high-grade anodized brushed aluminum to reduce audio resonance

Dimension: 17" x 14" x 3.5" (height does not include feet)

Worldwide AC voltage (84VAC to 264VAC). No need for AC regulator if the AC voltage falls within the specified range.

Weight: 33 lbs

NuForceTM Analog Switching Amplifier technology is built on the principle that a power oscillator can be modulated by an audio signal so that it produces an amplified audio signal via a reconstruction filter without the bandwidth limitation of a conventional, fixed-frequency, carrier-based PWM control. Our design employs a high-performance analog modulation technique and closed-loop control system, which is why we refer to our product as an Analog Switching Amplifier.

NuForce developed its revolutionary amplifier technology from the ground up to reassess and redefine faithful music reproduction. The first impressions of listening to NuForce amplifiers are those of pristine clarity, natural tonality, expansive imagery, and realistic proportions of the musicians and their instruments. Bass notes are well defined and articulate, with addictive rhythm and drive.

NuForce believes that uncompromised and uncompromising music reproduction requires the following:

High Bandwidth

Our Analog Switching Amplifier produces a flat response from 20 to 120,000 Hz with very low variations and extend toward 150Khz at -3db. Only a handful of very expensive linear amplifiers can boast that kind of bandwidth. Indeed, many linear and digital switching designs fall short of a 20-25,000Hz bandwidth.

Low Distortion

The majority of today's amplifiers claim less than 0.1% Total Harmonic Distortion (THD). It's important to note, however, that the seemingly low figure is normally achieved when measured at 1W using a 1000Hz sine wave. At full power, these distortion figures can be as much as 100 times greater, and as frequencies rise, distortion increases further still. NuForce's patented and patent-pending technologies cancel distortion at every aspect of operation. Our Analog Switching Amplifier boasts vanishingly low distortion characteristics at high output power level or audio frequency.